Flip-top cap dispensing trials: what should buyers compare with the actual formulation?
A cap fitting a bottle does not establish how the contents will dispense. Specify the formulation, complete pack and user action together when requesting samples.

Identify the pack and formulation
Start with the cap code and sample batch, bottle drawing revision, fill quantity and formulation identifier. If the commercial formula is confidential, agree what technical information and samples can be shared. Do not treat a preliminary observation with water as approval for sauce, shampoo or another filling. This is a buyer’s preparation checklist, not a standard test method.
State the measurement conditions
Assess viscosity together with temperature and measurement conditions. Include any available measurement report, method, sample preparation and waiting time. Identify missing data instead of assigning a value by appearance. Record whether the tested formulation and pack match the combination covered by the purchasing decision.
Make the user action repeatable
Describe bottle orientation, fill level, opening the lid and any squeezing action. Agree sample numbers and repetitions with the technical team beforehand. Record the start of flow, interruptions and dripping after the action ends separately. Do not report an unmeasured dose, flow rate or force as a result.
Set acceptance criteria before seeing results
Agree acceptable dispensing and dripping behaviour for the intended use in advance. Also record build-up around the outlet and visible residue after reclosing. These observations do not replace separate assessments of leak resistance, material compatibility with the filling or regulatory compliance. If trial conditions change, document a new trial rather than disguising an unfavourable result.
Send a comparison the supplier can assess
Keep conditions, observations, photographs and the unresolved question together for each sample. Peksan’s current product record identifies 028.026CTP10B as a 28 mm HDPE flip-top cap. Consult the technical sheet on the product page and identify the revision used in your enquiry. Do not infer universal bottle compatibility or drip-free performance from nominal size; request sample assessment for the actual combination.
